diff --git a/docs/Decisions.md b/docs/Decisions.md
index a4bb677..199b036 100644
--- a/docs/Decisions.md
+++ b/docs/Decisions.md
@@ -958,3 +958,78 @@ already-cached one.
 (e.g. for the storage-management panel's exact byte accounting), reuse it
 here too so a genuinely partial cache falls back to the "Downloading" copy
 instead of "Loading from cache."
+
+## D-034 — Browser-engine live status no longer claims "Listening" before the model is ready
+**Status:** Accepted (2026-07-30)
+**Symptom:** On the browser engine (not `useServer`), clicking "Start live
+transcription" showed the full "recording" UI — the pulsing red `live-dot`
+and the "Listening — like everything else, your audio stays on this device."
+hint (`src/components/LiveControls.tsx`) — as soon as microphone permission
+was granted, even when the model still had to load (first use of a model, or
+a model/device switch mid-session that reset the pipeline). The user saw what
+looked like an active live session while nothing was actually being
+transcribed yet.
+**Cause:** in `startLive()`'s browser-engine branch (`src/App.tsx`), the
+`await startMicCapture(...)` call was immediately followed by
+`setLiveStatus("listening")` with no check on whether the pipeline had
+actually reported `ready`. The model load itself was already correctly
+kicked off just above (idempotent `startLoad`/`load` postMessage, D-020) and
+`transcribeLiveSegment()` already correctly `await`s `browserModelReady()`
+(the promise on `loadGate.current`, resolved by the worker's `{status:
+"ready"}` message or rejected on a load-stage error/cancel, D-025) before
+posting any segment — so no segments were ever lost or misrouted to a wrong
+pipeline. This was a pure UI/status bug, not a data-correctness one. The
+server-engine (`useServer`) branch never loads a browser pipeline, so it was
+never affected and is untouched by this fix.
+**Fix:**
+1. `LiveStatus` (`src/components/LiveControls.tsx`) gains a `"loading-model"`
+   member between `"starting"` and `"listening"`, labeled "Loading model…".
+   It disables the Start/Stop button exactly like `"starting"`/`"stopping"`
+   do, and — because only `status === "listening"` sets the component's
+   `listening` boolean — it renders neither the `live-dot` nor the
+   "Listening — …" hint (falls into the same "not listening yet" branch as
+   `"idle"`/`"starting"`/`"stopping"`).
+2. In `startLive()`, once `startMicCapture` resolves and `liveRef.current` is
+   set: if `loadProgress.ready` is already `true` (pipeline loaded earlier
+   this session, no model/device switch pending), status goes straight to
+   `"listening"` as before. Otherwise status becomes `"loading-model"` and the
+   code `await`s `browserModelReady()`:
+   - On resolve, it re-checks `liveRef.current === session` (the user could
+     have hit Stop, or started a fresh session, while the wait was pending)
+     before flipping to `"listening"` — never resurrects a torn-down session.
+   - On reject (load failed), it stops the mic and clears `liveRef.current`
+     (same re-check) and returns status to `"idle"`, **without** calling
+     `setError()` itself — the worker's own `"error"` message handler already
+     calls `setError()` for `stage === "load"` failures (`src/App.tsx`
+     ~line 380), so a second call here would have shown two error messages
+     for one failure.
+3. `stopLive()` needed no change: its existing guard
+   (`if (!session || liveStatus !== "listening") return;`) already makes it a
+   no-op during `"loading-model"`, exactly mirroring how it already no-ops
+   during `"starting"` — consistent with the Stop button being disabled for
+   both statuses per (1).
+**Consequence:** live-dot/hint/button now truthfully reflect whether audio is
+actually reaching a ready pipeline. The only added latency is the same wait
+`transcribeLiveSegment` was already imposing on the first segment pass — nothing
+downstream changed. `tests/live.md`'s permission-flow step was updated to
+describe the new "Loading model…" interim state instead of the old
+immediate-"Stop" behavior.
+**Alternatives rejected:** gating on `loadGate.current === null` instead of
+`loadProgress.ready` — `loadGate.current` is only nulled out on an explicit
+model/device-switch reset or load cancel, not after a successful `ready`, so
+it stays non-null (holding an already-resolved promise) for the rest of the
+session; checking it would have made every subsequent live start take a
+detour through `"loading-model"` for a promise that resolves on the same
+tick, an unnecessary (if harmless) status flash. `loadProgress.ready` is the
+same signal `showModelProgress`/`modelReady` already use elsewhere in
+`App.tsx` and tracks exactly what the fix needs: has *this* model/device
+selection reported ready yet.
+**Testing:** no unit test added — `LiveControls` has no existing
+component-level test file to extend, and the state machine this fix changes
+(`startLive()`'s wait/race handling around a real `Worker`, `MediaStream`, and
+DOM) has no natural seam for a `bun test` unit test without mocking most of
+the worker/mic stack, which the project's live tests (`tests/live.test.ts`,
+`tests/live-accuracy.test.ts`) deliberately avoid — they test the pure
+segment/scheduling logic in `src/lib/live.ts` instead. Manual verification
+via `tests/live.md` remains the intended coverage for this UI path, and its
+permission-flow step was updated accordingly (see Consequence above).
diff --git a/src/App.tsx b/src/App.tsx
index 8570064..89370b8 100644
--- a/src/App.tsx
+++ b/src/App.tsx
@@ -889,8 +889,34 @@ export function App() {
 
     try {
       const mic = await startMicCapture((chunk) => transcriber.push(chunk));
-      liveRef.current = { mic, transcriber };
-      setLiveStatus("listening");
+      const session = { mic, transcriber };
+      liveRef.current = session;
+      if (loadProgress.ready) {
+        // Pipeline already loaded for the current model/device — nothing to
+        // wait on, go straight to "listening" as before.
+        setLiveStatus("listening");
+      } else {
+        // Model not ready yet (first use, or a model/device switch): don't
+        // claim "Listening" until the pipeline actually is one, otherwise the
+        // live-dot/hint imply an active session while nothing is being
+        // transcribed (D-034). `transcribeLiveSegment` already awaits the
+        // same gate before posting, so no segments are lost either way.
+        setLiveStatus("loading-model");
+        try {
+          await browserModelReady();
+          // The session could have been torn down (Stop, or another start)
+          // while we were waiting — only advance if it's still this one.
+          if (liveRef.current === session) setLiveStatus("listening");
+        } catch {
+          // Load failed; the worker's own "error" handler already calls
+          // setError() for stage:"load" failures, so don't duplicate it here.
+          if (liveRef.current === session) {
+            liveRef.current = null;
+            await mic.stop().catch(() => {});
+            setLiveStatus("idle");
+          }
+        }
+      }
     } catch (micError) {
       setLiveStatus("idle");
       const message =
diff --git a/src/components/LiveControls.tsx b/src/components/LiveControls.tsx
index 1e1edfc..249e345 100644
--- a/src/components/LiveControls.tsx
+++ b/src/components/LiveControls.tsx
@@ -1,6 +1,6 @@
 /** Live microphone transcription start/stop (M7, Decisions.md D-016). */
 
-export type LiveStatus = "idle" | "starting" | "listening" | "stopping";
+export type LiveStatus = "idle" | "starting" | "loading-model" | "listening" | "stopping";
 
 interface LiveControlsProps {
   status: LiveStatus;
@@ -13,6 +13,7 @@ interface LiveControlsProps {
 const LABELS: Record<LiveStatus, string> = {
   idle: "Start live transcription",
   starting: "Requesting microphone…",
+  "loading-model": "Loading model…",
   listening: "Stop",
   stopping: "Finishing…",
 };
@@ -31,7 +32,9 @@ export function LiveControls({
         type="button"
         className={`live-button${listening ? " live-button-active" : ""}`}
         onClick={status === "idle" ? onStart : onStop}
-        disabled={disabled || status === "starting" || status === "stopping"}
+        disabled={
+          disabled || status === "starting" || status === "loading-model" || status === "stopping"
+        }
         aria-pressed={listening}
       >
         {LABELS[status]}
@@ -46,6 +49,7 @@ export function LiveControls({
           whoever triggered it. */}
       <span className="visually-hidden" role="status">
         {status === "starting" && "Requesting microphone access"}
+        {status === "loading-model" && "Loading model"}
         {status === "listening" && "Live transcription started"}
         {status === "stopping" && "Finishing live transcription"}
       </span>
diff --git a/tests/live.md b/tests/live.md
index 5d47577..61d3de6 100644
--- a/tests/live.md
+++ b/tests/live.md
@@ -43,10 +43,13 @@ Re-run it after any change to `src/lib/live.ts`, `src/lib/mic.ts`,
 2. The browser prompts for the microphone. **Deny** it: the button must return
    to idle and the error "Microphone access was denied…" must appear; the app
    stays usable (file flow unaffected).
-3. Click again and **allow**: button becomes **Stop** with a pulsing red dot;
-   the browser's mic indicator turns on. If the model wasn't downloaded yet,
-   the download progress panel appears and live text simply starts once it is
-   ready (segment passes queue in the worker).
+3. Click again and **allow**: the browser's mic indicator turns on immediately.
+   If the model was already loaded, the button becomes **Stop** with a pulsing
+   red dot right away. If not (first use, or a model/device switch), the
+   button instead shows **"Loading model…"** (disabled, no live dot, no
+   "Listening…" hint) while the download/progress panel appears, and only
+   flips to **Stop**/pulsing dot once the pipeline actually reports ready
+   (D-034) — it must never claim "Listening" before that.
 
 ## 2. Live transcription behavior