bisync: compare only test specific log lines in most golden tests

Every bisync golden log contained the same boilerplate log messages,
so changing the wording of one of them changed nearly every golden
log. This made independent changes to bisync conflict with each other
when merging.

Compare the log in full only for the basic, check_access, dry_run,
filters and resync test cases, which between them pin the wording and
order of the common messages. For all other test cases compare only
the lines specific to the test: the test steps, anything logged at
NOTICE or ERROR level, and INFO lines about a named file, directory
or path.

A common log message now appears in 5 golden logs rather than 29.
Listings and queue files are compared exactly as before.

cmd/bisync/bisync_test.go

@@ -159,6 +159,40 @@ var logHoppers = []string{
 	`INFO  : .*: Renamed from .*`,
 }
 
+// fullLogCases are the test cases whose golden log is compared in full.
+//
+// These pin the wording and order of the log messages common to every
+// bisync run. All other test cases compare only the lines matching
+// logKeepers so that a change to a common message does not change
+// every golden log.
+var fullLogCases = map[string]bool{
+	"basic":        true,
+	"check_access": true,
+	"dry_run":      true,
+	"filters":      true,
+	"resync":       true,
+}
+
+// logKeepers match the log lines which are specific to a test case.
+// Lines must match in full, ignoring any terminal colors.
+var logKeepers = []string{
+	// test steps and their output
+	`\(\d\d\)  :.*`,
+	`Bisync error: .*`,
+	`.* - filename hash: .*`,
+	// anything logged above INFO level
+	`(?:NOTICE|ERROR ):.*`,
+	// changes found and queued for individual files
+	`INFO  : - +Path[12] +(?:File|Queue) .* - .*`,
+	// anything logged about a named file, directory or path
+	`INFO  : [^:]+: .+`,
+}
+
+var (
+	regexLogKeepers = regexp.MustCompile("^(?:" + strings.Join(logKeepers, "|") + ")$")
+	regexColor      = regexp.MustCompile(`\x1b\[[0-9;]*m`)
+)
+
 // Some log lines can contain Windows path separator that must be
 // converted to "/" in every matching token to match golden logs.
 var logLinesWithSlash = []string{
@@ -1709,12 +1743,15 @@ func (b *bisyncTest) mangleResult(dir, file string, golden bool) string {
 			s = regexBackslash.ReplaceAllString(s, "/")
 		}
 
+		// Dropping a line here rather than above ends any group being sorted below
+		dropped := s != "" && !fullLogCases[b.testCase] && !regexLogKeepers.MatchString(regexColor.ReplaceAllString(s, ""))
+
 		// Sort consecutive groups of naturally unordered lines.
 		// Any such group must end before the log ends or it might be lost.
 		absorbed := false
 		for i := range dampers {
 			match := false
-			if s != "" && !absorbed {
+			if s != "" && !absorbed && !dropped {
 				match = hoppers[i].MatchString(s)
 			}
 			if match {
@@ -1726,7 +1763,7 @@ func (b *bisyncTest) mangleResult(dir, file string, golden bool) string {
 				dampers[i] = nil
 			}
 		}
-		if absorbed {
+		if absorbed || dropped {
 			continue
 		}
 

cmd/bisync/testdata/test_all_changed/golden/test.log

@@ -3,25 +3,6 @@
 
 (02)  : test initial bisync
 (03)  : bisync resync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (04)  : test change timestamp on all files except RCLONE_TEST
 (05)  : touch-glob 2005-01-02 {path1/} file*
@@ -29,19 +10,6 @@ INFO  : Bisync successful
 
 (07)  : test sync should pass
 (08)  : bisync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File changed: time (newer) - file1.copy1.txt
 INFO  : - Path1    File changed: time (newer) - file1.copy2.txt
 INFO  : - Path1    File changed: time (newer) - file1.copy3.txt
@@ -51,8 +19,6 @@ INFO  : - Path1    File changed: time (newer)[0
 INFO  : - Path1    File changed: time (newer) - subdir/file20.txt
 INFO  : Path1:    7 changes:    0 new,    7 modified,    0 deleted
 INFO  : (Modified:    7 newer,    0 older)
-INFO  : Path2 checking for diffs
-INFO  : Applying changes
 INFO  : - Path1    Queue copy to Path2       - {path2/}file1.copy1.txt
 INFO  : - Path1    Queue copy to Path2       - {path2/}file1.copy2.txt
 INFO  : - Path1    Queue copy to Path2       - {path2/}file1.copy3.txt
@@ -60,11 +26,6 @@ INFO  : - Path1    Queue copy to Path2       - {
 INFO  : - Path1    Queue copy to Path2       - {path2/}file1.copy5.txt
 INFO  : - Path1    Queue copy to Path2       - {path2/}file1.txt
 INFO  : - Path1    Queue copy to Path2       - {path2/}subdir/file20.txt
-INFO  : - Path1    Do queued copies to                - Path2
-INFO  : There was nothing to transfer
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (09)  : test change timestamp on all files including RCLONE_TEST
 (10)  : touch-glob 2004-01-02 {path1/} *
@@ -72,19 +33,6 @@ INFO  : Bisync successful
 
 (12)  : test sync should fail
 (13)  : bisync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File changed: time (newer) - RCLONE_TEST
 INFO  : - Path1    File changed: time (older) - file1.copy1.txt
 INFO  : - Path1    File changed: time (older) - file1.copy2.txt
@@ -95,26 +43,12 @@ INFO  : - Path1    File changed: time (older)[0
 INFO  : - Path1    File changed: time (older) - subdir/file20.txt
 INFO  : Path1:    8 changes:    0 new,    8 modified,    0 deleted
 INFO  : (Modified:    1 newer,    7 older)
-INFO  : Path2 checking for diffs
 ERROR : Safety abort: all files were changed on Path1 "{path1/}". Run with --force if desired.
 NOTICE: Bisync aborted. Please try again.
 Bisync error: all files were changed
 
 (14)  : test sync with force should pass
 (15)  : bisync force
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File changed: time (newer) - RCLONE_TEST
 INFO  : - Path1    File changed: time (older) - file1.copy1.txt
 INFO  : - Path1    File changed: time (older) - file1.copy2.txt
@@ -125,8 +59,6 @@ INFO  : - Path1    File changed: time (older)[0
 INFO  : - Path1    File changed: time (older) - subdir/file20.txt
 INFO  : Path1:    8 changes:    0 new,    8 modified,    0 deleted
 INFO  : (Modified:    1 newer,    7 older)
-INFO  : Path2 checking for diffs
-INFO  : Applying changes
 INFO  : - Path1    Queue copy to Path2       - {path2/}RCLONE_TEST
 INFO  : - Path1    Queue copy to Path2       - {path2/}file1.copy1.txt
 INFO  : - Path1    Queue copy to Path2       - {path2/}file1.copy2.txt
@@ -135,8 +67,3 @@ INFO  : - Path1    Queue copy to Path2       - {
 INFO  : - Path1    Queue copy to Path2       - {path2/}file1.copy5.txt
 INFO  : - Path1    Queue copy to Path2       - {path2/}file1.txt
 INFO  : - Path1    Queue copy to Path2       - {path2/}subdir/file20.txt
-INFO  : - Path1    Do queued copies to                - Path2
-INFO  : There was nothing to transfer
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful

cmd/bisync/testdata/test_backupdir/golden/test.log

@@ -3,25 +3,6 @@
 
 (02)  : test initial bisync
 (03)  : bisync resync backupdir1={workdir/}backupdirs/backupdir1 backupdir2={workdir/}backupdirs/backupdir2
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (04)  : test make modifications on both paths
 (05)  : test new on path2 - file10
@@ -62,19 +43,6 @@ INFO  : Bisync successful
 
 (31)  : test bisync run
 (32)  : bisync backupdir1={workdir/}backupdirs/backupdir1 backupdir2={workdir/}backupdirs/backupdir2
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File changed: size (larger), time (newer) - file2.txt
 INFO  : - Path1    File was deleted          - file4.txt
 INFO  : - Path1    File changed: size (larger), time (newer) - file5.txt
@@ -84,7 +52,6 @@ INFO  : - Path1    File was deleted          - f
 INFO  : - Path1    File is new               - file11.txt
 INFO  : Path1:    7 changes:    1 new,    3 modified,    3 deleted
 INFO  : (Modified:    3 newer,    0 older,    3 larger,    0 smaller)
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File changed: size (larger), time (newer) - file1.txt
 INFO  : - Path2    File was deleted          - file3.txt
 INFO  : - Path2    File changed: size (larger), time (newer) - file5.txt
@@ -94,12 +61,9 @@ INFO  : - Path2    File was deleted          - f
 INFO  : - Path2    File is new               - file10.txt
 INFO  : Path2:    7 changes:    1 new,    3 modified,    3 deleted
 INFO  : (Modified:    3 newer,    0 older,    3 larger,    0 smaller)
-INFO  : Applying changes
-INFO  : Checking potential conflicts...
 ERROR : file5.txt: {hashtype} differ
 NOTICE: {path2String}: 1 differences found
 NOTICE: {path2String}: 1 errors while checking
-INFO  : Finished checking the potential conflicts. 1 differences found
 INFO  : - Path1    Queue copy to Path2       - {path2/}file11.txt
 INFO  : - Path1    Queue copy to Path2       - {path2/}file2.txt
 INFO  : - Path2    Queue delete              - {path2/}file4.txt
@@ -113,44 +77,10 @@ INFO  : - Path1    Queue copy to Path2       - {
 INFO  : - Path2    Queue copy to Path1       - {path1/}file1.txt
 INFO  : - Path2    Queue copy to Path1       - {path1/}file10.txt
 INFO  : - Path1    Queue delete              - {path1/}file3.txt
-INFO  : - Path2    Do queued copies to                - Path1
-INFO  : - Path1    Do queued copies to                - Path2
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 (33)  : bisync backupdir1={workdir/}backupdirs/backupdir1 backupdir2={workdir/}backupdirs/backupdir2
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
-INFO  : Path2 checking for diffs
-INFO  : No changes found
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (34)  : test overlapping path -- should fail
 (35)  : bisync backupdir1={path1/}subdir/backupdir1 backupdir2={path2/}subdir/backupdir2
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
 ERROR : Bisync critical error: destination and parameter to --backup-dir mustn't overlap
 ERROR : Bisync aborted. Must run --resync to recover.
 Bisync error: bisync aborted

cmd/bisync/testdata/test_changes/golden/test.log

@@ -3,25 +3,6 @@
 
 (02)  : test initial bisync
 (03)  : bisync resync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (04)  : test make modifications on both paths
 (05)  : test new on path2 - file10
@@ -62,19 +43,6 @@ INFO  : Bisync successful
 
 (31)  : test bisync run
 (32)  : bisync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File changed: size (larger), time (newer) - file2.txt
 INFO  : - Path1    File was deleted          - file4.txt
 INFO  : - Path1    File changed: size (larger), time (newer) - file5.txt
@@ -84,7 +52,6 @@ INFO  : - Path1    File was deleted          - f
 INFO  : - Path1    File is new               - file11.txt
 INFO  : Path1:    7 changes:    1 new,    3 modified,    3 deleted
 INFO  : (Modified:    3 newer,    0 older,    3 larger,    0 smaller)
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File changed: size (larger), time (newer) - file1.txt
 INFO  : - Path2    File was deleted          - file3.txt
 INFO  : - Path2    File changed: size (larger), time (newer) - file5.txt
@@ -94,12 +61,9 @@ INFO  : - Path2    File was deleted          - f
 INFO  : - Path2    File is new               - file10.txt
 INFO  : Path2:    7 changes:    1 new,    3 modified,    3 deleted
 INFO  : (Modified:    3 newer,    0 older,    3 larger,    0 smaller)
-INFO  : Applying changes
-INFO  : Checking potential conflicts...
 ERROR : file5.txt: {hashtype} differ
 NOTICE: {path2String}: 1 differences found
 NOTICE: {path2String}: 1 errors while checking
-INFO  : Finished checking the potential conflicts. 1 differences found
 INFO  : - Path1    Queue copy to Path2       - {path2/}file11.txt
 INFO  : - Path1    Queue copy to Path2       - {path2/}file2.txt
 INFO  : - Path2    Queue delete              - {path2/}file4.txt
@@ -113,8 +77,3 @@ INFO  : - Path1    Queue copy to Path2       - {
 INFO  : - Path2    Queue copy to Path1       - {path1/}file1.txt
 INFO  : - Path2    Queue copy to Path1       - {path1/}file10.txt
 INFO  : - Path1    Queue delete              - {path1/}file3.txt
-INFO  : - Path2    Do queued copies to                - Path1
-INFO  : - Path1    Do queued copies to                - Path2
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful

cmd/bisync/testdata/test_check_access_filters/golden/test.log

@@ -6,51 +6,9 @@
 
 (04)  : test resync to get the filters file {hashtype} built.
 (05)  : bisync resync filters-file={workdir/}exclude-other-filtersfile.txt
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Using filters file {workdir/}exclude-other-filtersfile.txt
-INFO  : Storing filters file hash to {workdir/}exclude-other-filtersfile.txt.{hashtype}
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (06)  : test EXCLUDE - test filters for check access
 (07)  : bisync check-access filters-file={workdir/}exclude-other-filtersfile.txt
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Using filters file {workdir/}exclude-other-filtersfile.txt
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
-INFO  : Path2 checking for diffs
-INFO  : Checking access health
-INFO  : Found 3 matching "RCLONE_TEST" files on both paths
-INFO  : No changes found
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 (08)  : copy-listings exclude-initial
 
 (09)  : test EXCLUDE - delete RCLONE_TEST files in excluded directories
@@ -61,27 +19,6 @@ INFO  : Bisync successful
 
 (14)  : test EXCLUDE - test should PASS
 (15)  : bisync check-access filters-file={workdir/}exclude-other-filtersfile.txt
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Using filters file {workdir/}exclude-other-filtersfile.txt
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
-INFO  : Path2 checking for diffs
-INFO  : Checking access health
-INFO  : Found 3 matching "RCLONE_TEST" files on both paths
-INFO  : No changes found
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 (16)  : copy-listings exclude-pass-run
 
 (17)  : test EXCLUDE - delete RCLONE_TEST files in included directories
@@ -90,26 +27,10 @@ INFO  : Bisync successful
 
 (20)  : test EXCLUDE - test should ABORT
 (21)  : bisync check-access filters-file={workdir/}exclude-other-filtersfile.txt
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Using filters file {workdir/}exclude-other-filtersfile.txt
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File was deleted          - subdir/RCLONE_TEST
 INFO  : Path1:    1 changes:    0 new,    0 modified,    1 deleted
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File was deleted          - RCLONE_TEST
 INFO  : Path2:    1 changes:    0 new,    0 modified,    1 deleted
-INFO  : Checking access health
 ERROR : -          Access test failed: Path1 file not found in Path2 - RCLONE_TEST
 ERROR : -          Access test failed: Path2 file not found in Path1 - subdir/RCLONE_TEST
 ERROR : Bisync critical error: check file check failed
@@ -123,51 +44,9 @@ Bisync error: bisync aborted
 (26)  : sync-dir {path1/} {path2/}
 (27)  : copy-file {datadir/}include-other-filtersfile.txt {workdir/}
 (28)  : bisync resync filters-file={workdir/}include-other-filtersfile.txt
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Using filters file {workdir/}include-other-filtersfile.txt
-INFO  : Storing filters file hash to {workdir/}include-other-filtersfile.txt.{hashtype}
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (29)  : test INCLUDE - test include/exclude filters for check access
 (30)  : bisync check-access filters-file={workdir/}include-other-filtersfile.txt
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Using filters file {workdir/}include-other-filtersfile.txt
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
-INFO  : Path2 checking for diffs
-INFO  : Checking access health
-INFO  : Found 5 matching "RCLONE_TEST" files on both paths
-INFO  : No changes found
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 (31)  : copy-listings include-initial
 
 (32)  : test INCLUDE - delete RCLONE_TEST files in excluded directories
@@ -177,27 +56,6 @@ INFO  : Bisync successful
 
 (36)  : test INCLUDE - test should PASS
 (37)  : bisync check-access filters-file={workdir/}include-other-filtersfile.txt
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Using filters file {workdir/}include-other-filtersfile.txt
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
-INFO  : Path2 checking for diffs
-INFO  : Checking access health
-INFO  : Found 5 matching "RCLONE_TEST" files on both paths
-INFO  : No changes found
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 (38)  : copy-listings include-pass-run
 
 (39)  : test INCLUDE - delete RCLONE_TEST files in included directories
@@ -207,27 +65,11 @@ INFO  : Bisync successful
 
 (43)  : test INCLUDE - test should ABORT
 (44)  : bisync check-access filters-file={workdir/}include-other-filtersfile.txt
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Using filters file {workdir/}include-other-filtersfile.txt
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File was deleted          - subdir/RCLONE_TEST
 INFO  : - Path1    File was deleted          - subdirX/subdirX1/RCLONE_TEST
 INFO  : Path1:    2 changes:    0 new,    0 modified,    2 deleted
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File was deleted          - RCLONE_TEST
 INFO  : Path2:    1 changes:    0 new,    0 modified,    1 deleted
-INFO  : Checking access health
 ERROR : Access test failed: Path1 count 3, Path2 count 4 - RCLONE_TEST
 ERROR : -          Access test failed: Path1 file not found in Path2 - RCLONE_TEST
 ERROR : -          Access test failed: Path2 file not found in Path1 - subdir/RCLONE_TEST

cmd/bisync/testdata/test_check_filename/golden/test.log

@@ -3,70 +3,16 @@
 
 (02)  : test initial bisync
 (03)  : bisync resync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (04)  : test 1. see that check-access passes with the initial setup
 (05)  : bisync check-access check-filename=.chk_file
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
-INFO  : Path2 checking for diffs
-INFO  : Checking access health
-INFO  : Found 2 matching ".chk_file" files on both paths
-INFO  : No changes found
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 (06)  : copy-listings initial-pass
 
 (07)  : test 2. delete the remote subdir .chk_file, run sync. should fail critical.
 (08)  : delete-file {path2/}subdir/.chk_file
 (09)  : bisync check-access check-filename=.chk_file
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File was deleted          - subdir/.chk_file
 INFO  : Path2:    1 changes:    0 new,    0 modified,    1 deleted
-INFO  : Checking access health
 ERROR : Access test failed: Path1 count 2, Path2 count 1 - .chk_file
 ERROR : -          Access test failed: Path1 file not found in Path2 - subdir/.chk_file
 ERROR : Bisync critical error: check file check failed
@@ -77,47 +23,6 @@ Bisync error: bisync aborted
 (11)  : test 3. put the remote subdir .chk_file back, run resync.
 (12)  : copy-file {path1/}subdir/.chk_file {path2/}subdir/
 (13)  : bisync check-access resync check-filename=.chk_file
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : Checking access health
-INFO  : Found 2 matching ".chk_file" files on both paths
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (14)  : test 4. run sync with check-access. should pass.
 (15)  : bisync check-access check-filename=.chk_file
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
-INFO  : Path2 checking for diffs
-INFO  : Checking access health
-INFO  : Found 2 matching ".chk_file" files on both paths
-INFO  : No changes found
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful

cmd/bisync/testdata/test_check_sync/golden/test.log

@@ -3,40 +3,9 @@
 
 (02)  : test initial bisync
 (03)  : bisync resync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (04)  : test 1. run check-sync-only on a clean sync
 (05)  : bisync check-sync-only
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (06)  : test 2. inject modified listings into the workdir
 (07)  : copy-as {datadir/}_testdir_path1.._testdir_path2.path1.lst {workdir/} {session}.path1.lst
@@ -44,17 +13,6 @@ INFO  : Bisync successful
 
 (09)  : test 3. run check-sync-only on modified listings
 (10)  : bisync check-sync-only
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
 ERROR : -          Path1 file not found in Path2      - file2.txt
 ERROR : -          Path2 file not found in Path1      - file1.txt
 ERROR : Bisync critical error: path1 and path2 are out of sync, run --resync to recover
@@ -64,23 +22,7 @@ Bisync error: bisync aborted
 
 (12)  : test 4. run normal sync to check that it aborts
 (13)  : bisync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
 ERROR : Bisync critical error: cannot find prior Path1 or Path2 listings, likely due to critical error on prior run
-Tip: here are the filenames we were looking for. Do they exist?
-Path1: {workdir/}{session}.path1.lst
-Path2: {workdir/}{session}.path2.lst
-Try running this command to inspect the work dir:
-rclone lsl "{workdir}"
 ERROR : Bisync aborted. Must run --resync to recover.
 Bisync error: bisync aborted
 
@@ -91,63 +33,9 @@ Bisync error: bisync aborted
 
 (18)  : test 6. run resync
 (19)  : bisync resync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (20)  : test 7. run normal sync with check-sync enabled (default)
 (21)  : bisync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
-INFO  : Path2 checking for diffs
-INFO  : No changes found
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (22)  : test 8. run normal sync with no-check-sync
 (23)  : bisync no-check-sync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
-INFO  : Path2 checking for diffs
-INFO  : No changes found
-INFO  : Updating listings
-INFO  : Bisync successful

cmd/bisync/testdata/test_compare_all/golden/test.log

@@ -3,24 +3,6 @@
 
 (02)  : test initial bisync
 (03)  : bisync resync compare-all
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": true,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": true
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (04)  : test make modifications on both paths
 (05)  : test new on path2 - file10
@@ -61,18 +43,6 @@ INFO  : Bisync successful
 
 (31)  : test bisync run
 (32)  : bisync compare-all
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": true,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": true
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File changed: size (larger), time (newer), hash - file2.txt
 INFO  : - Path1    File was deleted          - file4.txt
 INFO  : - Path1    File changed: size (larger), time (newer), hash - file5.txt
@@ -82,7 +52,6 @@ INFO  : - Path1    File was deleted          - f
 INFO  : - Path1    File is new               - file11.txt
 INFO  : Path1:    7 changes:    1 new,    3 modified,    3 deleted
 INFO  : (Modified:    3 newer,    0 older,    3 larger,    0 smaller,    3 hash differs)
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File changed: size (larger), time (newer), hash - file1.txt
 INFO  : - Path2    File was deleted          - file3.txt
 INFO  : - Path2    File changed: size (larger), time (newer), hash - file5.txt
@@ -92,7 +61,6 @@ INFO  : - Path2    File was deleted          - f
 INFO  : - Path2    File is new               - file10.txt
 INFO  : Path2:    7 changes:    1 new,    3 modified,    3 deleted
 INFO  : (Modified:    3 newer,    0 older,    3 larger,    0 smaller,    3 hash differs)
-INFO  : Applying changes
 INFO  : - Path1    Queue copy to Path2       - {path2/}file11.txt
 INFO  : - Path1    Queue copy to Path2       - {path2/}file2.txt
 INFO  : - Path2    Queue delete              - {path2/}file4.txt
@@ -106,8 +74,3 @@ INFO  : - Path1    Queue copy to Path2       - {
 INFO  : - Path2    Queue copy to Path1       - {path1/}file1.txt
 INFO  : - Path2    Queue copy to Path1       - {path1/}file10.txt
 INFO  : - Path1    Queue delete              - {path1/}file3.txt
-INFO  : - Path2    Do queued copies to                - Path1
-INFO  : - Path1    Do queued copies to                - Path2
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful

cmd/bisync/testdata/test_concurrent/golden/test.log

@@ -2,25 +2,6 @@
 
 (02)  : test initial bisync
 (03)  : bisync resync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (04)  : test changed on one path - file1
 (05)  : touch-glob 2001-01-02 {datadir/} file5R.txt
@@ -30,46 +11,9 @@ INFO  : Bisync successful
 (08)  : test bisync with file changed during
 (09)  : concurrent-func
 (10)  : bisync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File changed: size (larger), time (newer) - file1.txt
 INFO  : Path2:    1 changes:    0 new,    1 modified,    0 deleted
 INFO  : (Modified:    1 newer,    0 older,    1 larger,    0 smaller)
-INFO  : Applying changes
 INFO  : - Path2    Queue copy to Path1       - {path1/}file1.txt
-INFO  : - Path2    Do queued copies to                - Path1
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (11)  : bisync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
-INFO  : Path2 checking for diffs
-INFO  : No changes found
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful

cmd/bisync/testdata/test_createemptysrcdirs/golden/test.log

@@ -10,25 +10,6 @@
 (08)  : copy-as {datadir/}placeholder.txt {path1/} file1.copy4.txt
 (09)  : copy-as {datadir/}placeholder.txt {path1/} file1.copy5.txt
 (10)  : bisync resync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (11)  : test 1. Create an empty dir on Path1 by creating subdir/placeholder.txt and then deleting the placeholder
 (12)  : copy-as {datadir/}placeholder.txt {path1/} subdir/placeholder.txt
@@ -37,24 +18,6 @@ INFO  : Bisync successful
 
 (15)  : test 2. Run bisync without --create-empty-src-dirs
 (16)  : bisync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
-INFO  : Path2 checking for diffs
-INFO  : No changes found
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (17)  : test 3. Confirm the subdir exists only on Path1 and not Path2
 (18)  : list-dirs {path1/}
@@ -63,29 +26,9 @@ subdir/ - filename hash: 86ae37b338459868804e9697025ba4c2
 
 (20)  : test 4.Run bisync WITH --create-empty-src-dirs
 (21)  : bisync create-empty-src-dirs
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File is new               - subdir
 INFO  : Path1:    1 changes:    1 new,    0 modified,    0 deleted
-INFO  : Path2 checking for diffs
-INFO  : Applying changes
 INFO  : - Path1    Queue copy to Path2       - {path2/}subdir
-INFO  : - Path1    Do queued copies to                - Path2
-INFO  : There was nothing to transfer
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (22)  : test 5. Confirm the subdir exists on both paths
 (23)  : list-dirs {path1/}
@@ -104,32 +47,12 @@ subdir/ - filename hash: 86ae37b338459868804e9697025ba4c2
 
 (33)  : test 7. Run bisync without --create-empty-src-dirs
 (34)  : bisync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File was deleted          - RCLONE_TEST
 INFO  : - Path1    File was deleted          - subdir
 INFO  : Path1:    2 changes:    0 new,    0 modified,    2 deleted
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File was deleted          - subdir
 INFO  : Path2:    1 changes:    0 new,    0 modified,    1 deleted
-INFO  : Applying changes
 INFO  : - Path2    Queue delete              - {path2/}RCLONE_TEST
-INFO  : - Path1    Do queued copies to                - Path2
-INFO  : There was nothing to transfer
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (35)  : test 8. Confirm the subdir exists only on Path2 and not Path1
 (36)  : list-dirs {path1/}
@@ -138,25 +61,6 @@ subdir/ - filename hash: 86ae37b338459868804e9697025ba4c2
 
 (38)  : test 9. Reset, do the delete again, and run bisync WITH --create-empty-src-dirs
 (39)  : bisync resync create-empty-src-dirs
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 (40)  : list-dirs {path1/}
 subdir/ - filename hash: 86ae37b338459868804e9697025ba4c2
 (41)  : list-dirs {path2/}
@@ -174,30 +78,10 @@ subdir/ - filename hash: 86ae37b338459868804e9697025ba4c2
 subdir/ - filename hash: 86ae37b338459868804e9697025ba4c2
 
 (51)  : bisync create-empty-src-dirs
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File was deleted          - subdir
 INFO  : Path1:    1 changes:    0 new,    0 modified,    1 deleted
-INFO  : Path2 checking for diffs
-INFO  : Applying changes
 INFO  : - Path2    Queue delete              - {path2/}subdir
-INFO  : - Path1    Do queued copies to                - Path2
-INFO  : There was nothing to transfer
 INFO  : subdir: Removing directory
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (52)  : test 10. Confirm the subdir has been removed on both paths
 (53)  : list-dirs {path1/}
@@ -205,21 +89,3 @@ INFO  : Bisync successful
 
 (55)  : test 11. bisync again (because if we leave subdir in listings, test will fail due to mismatched modtime)
 (56)  : bisync create-empty-src-dirs
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
-INFO  : Path2 checking for diffs
-INFO  : No changes found
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful

cmd/bisync/testdata/test_equal/golden/test.log

@@ -3,25 +3,6 @@
 
 (02)  : test initial bisync
 (03)  : bisync resync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (04)  : test changed on both paths and NOT identical - file1 (file1R, file1L)
 (05)  : touch-glob 2001-01-02 {datadir/} file1R.txt
@@ -36,35 +17,18 @@ INFO  : Bisync successful
 
 (13)  : test bisync run
 (14)  : bisync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File changed: size (larger), time (newer) - file1.txt
 INFO  : - Path1    File changed: size (larger), time (newer) - file2.txt
 INFO  : Path1:    2 changes:    0 new,    2 modified,    0 deleted
 INFO  : (Modified:    2 newer,    0 older,    2 larger,    0 smaller)
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File changed: size (larger), time (newer) - file1.txt
 INFO  : - Path2    File changed: size (larger), time (newer) - file2.txt
 INFO  : Path2:    2 changes:    0 new,    2 modified,    0 deleted
 INFO  : (Modified:    2 newer,    0 older,    2 larger,    0 smaller)
-INFO  : Applying changes
-INFO  : Checking potential conflicts...
 ERROR : file1.txt: {hashtype} differ
 NOTICE: {path2String}: 1 differences found
 NOTICE: {path2String}: 1 errors while checking
 NOTICE: {path2String}: 1 matching files
-INFO  : Finished checking the potential conflicts. 1 differences found
 NOTICE: - WARNING  New or changed in both paths       - file1.txt
 NOTICE: - Path1    Renaming Path1 copy                - {path1/}file1.txt.conflict1
 NOTICE: - Path1    Queue copy to Path2       - {path2/}file1.txt.conflict1
@@ -72,8 +36,3 @@ NOTICE: - Path2    Renaming Path2 copy                - {
 NOTICE: - Path2    Queue copy to Path1       - {path1/}file1.txt.conflict2
 NOTICE: - WARNING  New or changed in both paths       - file2.txt
 INFO  : Files are equal! Skipping: file2.txt
-INFO  : - Path2    Do queued copies to                - Path1
-INFO  : - Path1    Do queued copies to                - Path2
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful

cmd/bisync/testdata/test_ext_paths/golden/test.log

@@ -14,25 +14,6 @@
 
 (12)  : test resync subdirs with extended chars
 (13)  : bisync subdir=測試Русский{spc}{spc}ěáñ resync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}測試Русский  ěáñ/" with Path2 "{path2/}測試Русский  ěáñ/"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}測試Русский  ěáñ/" vs Path2 "{path2/}測試Русский  ěáñ/"
-INFO  : Bisync successful
 (14)  : copy-listings resync
 
 (15)  : test place new files with extended chars on each side
@@ -43,74 +24,20 @@ INFO  : Bisync successful
 
 (19)  : test normal sync of subdirs with extended chars
 (20)  : bisync subdir=測試Русский{spc}{spc}ěáñ
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}測試Русский  ěáñ/" with Path2 "{path2/}測試Русский  ěáñ/"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File is new               - 測試_file1p1
 INFO  : Path1:    1 changes:    1 new,    0 modified,    0 deleted
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File is new               - 測試_file1p2
 INFO  : Path2:    1 changes:    1 new,    0 modified,    0 deleted
-INFO  : Applying changes
 INFO  : - Path1    Queue copy to Path2       - {path2/}測試Русский  ěáñ/測試_file1p1
 INFO  : - Path2    Queue copy to Path1       - {path1/}測試Русский  ěáñ/測試_file1p2
-INFO  : - Path2    Do queued copies to                - Path1
-INFO  : - Path1    Do queued copies to                - Path2
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}測試Русский  ěáñ/" vs Path2 "{path2/}測試Русский  ěáñ/"
-INFO  : Bisync successful
 (21)  : move-listings normal-sync
 
 (22)  : test check-filename with extended chars. check should fail.
 (23)  : bisync resync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 (24)  : delete-file {path1/}測試Русский{spc}{spc}ěáñ/測試_check{spc}file
 (25)  : bisync check-access check-filename=測試_check{spc}file
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File was deleted          - 測試Русский  ěáñ/測試_check file
 INFO  : Path1:    1 changes:    0 new,    0 modified,    1 deleted
-INFO  : Path2 checking for diffs
-INFO  : Checking access health
 ERROR : Access test failed: Path1 count 1, Path2 count 2 - 測試_check file
 ERROR : -          Access test failed: Path2 file not found in Path1 - 測試Русский  ěáñ/測試_check file
 ERROR : Bisync critical error: check file check failed
@@ -120,88 +47,11 @@ Bisync error: bisync aborted
 
 (27)  : test check-filename with extended chars. check should pass.
 (28)  : bisync resync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 (29)  : bisync check-access check-filename=測試_check{spc}file
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
-INFO  : Path2 checking for diffs
-INFO  : Checking access health
-INFO  : Found 2 matching "測試_check file" files on both paths
-INFO  : No changes found
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 (30)  : move-listings check-access-pass
 
 (31)  : test filters-file path with extended chars - masks /fileZ.txt
 (32)  : copy-file {datadir/}測試_filtersfile.txt {workdir/}
 (33)  : bisync filters-file={workdir/}測試_filtersfile.txt resync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Using filters file {workdir/}測試_filtersfile.txt
-INFO  : Storing filters file hash to {workdir/}測試_filtersfile.txt.{hashtype}
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 (34)  : copy-as {datadir/}file1.txt {path1/} fileZ.txt
 (35)  : bisync filters-file={workdir/}測試_filtersfile.txt
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Using filters file {workdir/}測試_filtersfile.txt
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
-INFO  : Path2 checking for diffs
-INFO  : No changes found
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful

cmd/bisync/testdata/test_extended_filenames/golden/test.log

@@ -12,23 +12,6 @@
 
 (10)  : test initial bisync
 (11)  : bisync resync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (12)  : test place a newer files on both paths
 
@@ -59,19 +42,6 @@ INFO  : Bisync successful
 
 (35)  : test bisync run
 (36)  : bisync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File was deleted          - Русский.txt
 INFO  : - Path1    File is new               - file1_with white space.txt
 INFO  : - Path1    File is new               - filename_contains_ࢺ_p1m.txt
@@ -80,7 +50,6 @@ INFO  : - Path1    File is new               - s
 INFO  : - Path1    File is new               - subdir_with_ࢺ_/mañana_funcionará.txt
 INFO  : - Path1    File is new               - subdir_with_ࢺ_/test.txt
 INFO  : Path1:    7 changes:    6 new,    0 modified,    1 deleted
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File changed: size (larger), time (newer) - file_enconde_mañana_funcionará.txt
 INFO  : - Path2    File was deleted          - filename_contains_ࢺ_.txt
 INFO  : - Path2    File was deleted          - subdir_with_ࢺ_/filename_contains_ě_.txt
@@ -92,7 +61,6 @@ INFO  : - Path2    File is new               - s
 INFO  : - Path2    File is new               - subdir_with_ࢺ_/filename_contains_ࢺ_p2s.txt
 INFO  : Path2:    9 changes:    5 new,    2 modified,    2 deleted
 INFO  : (Modified:    2 newer,    0 older,    2 larger,    0 smaller)
-INFO  : Applying changes
 INFO  : - Path1    Queue copy to Path2       - {path2/}file1_with white space.txt
 INFO  : - Path1    Queue copy to Path2       - {path2/}filename_contains_ࢺ_p1m.txt
 INFO  : - Path1    Queue copy to Path2       - {path2/}subdir_with_ࢺ_/file_with_測試_.txt
@@ -111,8 +79,3 @@ INFO  : - Path2    Queue copy to Path1       - {
 INFO  : - Path2    Queue copy to Path1       - "{path1/}subdir_rawchars_␙_\x81_\xfe/file3_␙_\x81_\xfe"
 INFO  : - Path1    Queue delete              - {path1/}subdir_with_ࢺ_/filename_contains_ě_.txt
 INFO  : - Path2    Queue copy to Path1       - {path1/}subdir_with_ࢺ_/filename_contains_ࢺ_p2s.txt
-INFO  : - Path2    Do queued copies to                - Path1
-INFO  : - Path1    Do queued copies to                - Path2
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful

cmd/bisync/testdata/test_filtersfile_checks/golden/test.log

@@ -3,173 +3,44 @@
 
 (02)  : test initial bisync
 (03)  : bisync resync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (04)  : test 1. inject filters file in workdir.
 (05)  : copy-file {datadir/}filtersfile.txt {workdir/}
 
 (06)  : test 2. run with filters-file but without {hashtype}. should abort.
 (07)  : bisync filters-file={workdir/}filtersfile.txt
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Using filters file {workdir/}filtersfile.txt
 ERROR : Bisync critical error: filters file {hashtype} hash not found (must run --resync): {workdir/}filtersfile.txt
 ERROR : Bisync aborted. Must run --resync to recover.
 Bisync error: bisync aborted
 
 (08)  : test 3. run without filters-file. should be blocked due to prior abort.
 (09)  : bisync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
 ERROR : Bisync critical error: cannot find prior Path1 or Path2 listings, likely due to critical error on prior run
-Tip: here are the filenames we were looking for. Do they exist?
-Path1: {workdir/}{session}.path1.lst
-Path2: {workdir/}{session}.path2.lst
-Try running this command to inspect the work dir:
-rclone lsl "{workdir}"
 ERROR : Bisync aborted. Must run --resync to recover.
 Bisync error: bisync aborted
 
 (10)  : test 4. run with filters-file and resync.
 (11)  : bisync filters-file={workdir/}filtersfile.txt resync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Using filters file {workdir/}filtersfile.txt
-INFO  : Storing filters file hash to {workdir/}filtersfile.txt.{hashtype}
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (12)  : test 5. run with filters-file alone. should run.
 (13)  : bisync filters-file={workdir/}filtersfile.txt
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Using filters file {workdir/}filtersfile.txt
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
-INFO  : Path2 checking for diffs
-INFO  : No changes found
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (14)  : test 6. push changed filters-file to workdir.
 (15)  : copy-as {datadir/}filtersfile2.txt {workdir/} filtersfile.txt
 
 (16)  : test 7. run with filters-file alone. should abort.
 (17)  : bisync filters-file={workdir/}filtersfile.txt
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Using filters file {workdir/}filtersfile.txt
 ERROR : Bisync critical error: filters file has changed (must run --resync): {workdir/}filtersfile.txt
 ERROR : Bisync aborted. Must run --resync to recover.
 Bisync error: bisync aborted
 
 (18)  : test 8. run with filters-file and resync and dry-run. should do the dry-run but still cause next non-resync run to abort.
 (19)  : bisync filters-file={workdir/}filtersfile.txt resync dry-run
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Using filters file {workdir/}filtersfile.txt
-INFO  : Skipped storing filters file hash to {workdir/}filtersfile.txt.{hashtype} as --dry-run is set
-INFO  : Copying Path2 files to Path1
 NOTICE: - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
 NOTICE: - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Bisync successful
 
 (20)  : test 9. run with filters-file alone. should abort.
 (21)  : bisync filters-file={workdir/}filtersfile.txt
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Using filters file {workdir/}filtersfile.txt
 ERROR : Bisync critical error: filters file has changed (must run --resync): {workdir/}filtersfile.txt
 ERROR : Bisync aborted. Must run --resync to recover.
 Bisync error: bisync aborted

cmd/bisync/testdata/test_ignorelistingchecksum/golden/test.log

@@ -3,44 +3,7 @@
 
 (02)  : test initial bisync
 (03)  : bisync resync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 (04)  : bisync resync ignore-listing-checksum
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (05)  : test place newer files on both paths
 
@@ -49,30 +12,11 @@ INFO  : Bisync successful
 
 (08)  : test bisync run
 (09)  : bisync ignore-listing-checksum
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File changed: size (larger), time (newer) - subdir/file20.txt
 INFO  : Path1:    1 changes:    0 new,    1 modified,    0 deleted
 INFO  : (Modified:    1 newer,    0 older,    1 larger,    0 smaller)
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File changed: size (larger), time (newer) - file1.txt
 INFO  : Path2:    1 changes:    0 new,    1 modified,    0 deleted
 INFO  : (Modified:    1 newer,    0 older,    1 larger,    0 smaller)
-INFO  : Applying changes
 INFO  : - Path1    Queue copy to Path2       - {path2/}subdir/file20.txt
 INFO  : - Path2    Queue copy to Path1       - {path1/}file1.txt
-INFO  : - Path2    Do queued copies to                - Path1
-INFO  : - Path1    Do queued copies to                - Path2
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful

cmd/bisync/testdata/test_max_delete_path1/golden/test.log

@@ -3,25 +3,6 @@
 
 (02)  : test initial bisync
 (03)  : bisync resync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (04)  : test delete >50% of local files
 (05)  : delete-file {path1/}file1.txt
@@ -32,26 +13,12 @@ INFO  : Bisync successful
 
 (10)  : test sync should fail due to too many local deletes
 (11)  : bisync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File was deleted          - file1.txt
 INFO  : - Path1    File was deleted          - file2.txt
 INFO  : - Path1    File was deleted          - file3.txt
 INFO  : - Path1    File was deleted          - file4.txt
 INFO  : - Path1    File was deleted          - file5.txt
 INFO  : Path1:    5 changes:    0 new,    0 modified,    5 deleted
-INFO  : Path2 checking for diffs
 ERROR : Safety abort: too many deletes (>50%, 5 of 9) on Path1 "{path1/}". Run with --force if desired.
 NOTICE: Bisync aborted. Please try again.
 Bisync error: too many deletes
@@ -59,34 +26,14 @@ Bisync error: too many deletes
 
 (13)  : test change max-delete limit to 60%. sync should run.
 (14)  : bisync max-delete=60
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File was deleted          - file1.txt
 INFO  : - Path1    File was deleted          - file2.txt
 INFO  : - Path1    File was deleted          - file3.txt
 INFO  : - Path1    File was deleted          - file4.txt
 INFO  : - Path1    File was deleted          - file5.txt
 INFO  : Path1:    5 changes:    0 new,    0 modified,    5 deleted
-INFO  : Path2 checking for diffs
-INFO  : Applying changes
 INFO  : - Path2    Queue delete              - {path2/}file1.txt
 INFO  : - Path2    Queue delete              - {path2/}file2.txt
 INFO  : - Path2    Queue delete              - {path2/}file3.txt
 INFO  : - Path2    Queue delete              - {path2/}file4.txt
 INFO  : - Path2    Queue delete              - {path2/}file5.txt
-INFO  : - Path1    Do queued copies to                - Path2
-INFO  : There was nothing to transfer
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful

cmd/bisync/testdata/test_max_delete_path2_force/golden/test.log

@@ -3,25 +3,6 @@
 
 (02)  : test initial bisync
 (03)  : bisync resync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (04)  : test delete >50% of remote files
 (05)  : delete-file {path2/}file1.txt
@@ -32,20 +13,6 @@ INFO  : Bisync successful
 
 (10)  : test sync should fail due to too many path2 deletes
 (11)  : bisync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File was deleted          - file1.txt
 INFO  : - Path2    File was deleted          - file2.txt
 INFO  : - Path2    File was deleted          - file3.txt
@@ -59,34 +26,14 @@ Bisync error: too many deletes
 
 (13)  : test apply force option. sync should run.
 (14)  : bisync force
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File was deleted          - file1.txt
 INFO  : - Path2    File was deleted          - file2.txt
 INFO  : - Path2    File was deleted          - file3.txt
 INFO  : - Path2    File was deleted          - file4.txt
 INFO  : - Path2    File was deleted          - file5.txt
 INFO  : Path2:    5 changes:    0 new,    0 modified,    5 deleted
-INFO  : Applying changes
 INFO  : - Path1    Queue delete              - {path1/}file1.txt
 INFO  : - Path1    Queue delete              - {path1/}file2.txt
 INFO  : - Path1    Queue delete              - {path1/}file3.txt
 INFO  : - Path1    Queue delete              - {path1/}file4.txt
 INFO  : - Path1    Queue delete              - {path1/}file5.txt
-INFO  : - Path2    Do queued copies to                - Path1
-INFO  : There was nothing to transfer
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful

cmd/bisync/testdata/test_max_delete_track_renames/golden/test.log

@@ -3,26 +3,8 @@
 
 (02)  : test resync bypasses rename-aware hash preflight with ignored listing checksums
 (03)  : bisync resync track-renames max-delete-renames-aware ignore-listing-checksum
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
 ERROR : {path1String}: Ignoring --track-renames as it doesn't work with copy or move, only sync
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
 ERROR : {path2String}: Ignoring --track-renames as it doesn't work with copy or move, only sync
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (04)  : test rename-aware max-delete requires track-renames
 (05)  : bisync max-delete-renames-aware
@@ -53,19 +35,6 @@ Bisync error: --max-delete-renames-aware with a hash strategy is incompatible wi
 
 (24)  : test track-renames alone should retain the max-delete safety abort
 (25)  : bisync track-renames
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File was deleted          - file1.txt
 INFO  : - Path1    File was deleted          - file2.txt
 INFO  : - Path1    File was deleted          - file3.txt
@@ -77,7 +46,6 @@ INFO  : - Path1    File is new               - r
 INFO  : - Path1    File is new               - renamed-file4.txt
 INFO  : - Path1    File is new               - renamed-file5.txt
 INFO  : Path1:   10 changes:    5 new,    0 modified,    5 deleted
-INFO  : Path2 checking for diffs
 ERROR : Safety abort: too many deletes (>50%, 5 of 9) on Path1 "{path1/}". Run with --force if desired.
 NOTICE: Bisync aborted. Please try again.
 Bisync error: too many deletes
@@ -85,18 +53,6 @@ Bisync error: too many deletes
 
 (27)  : test rename-aware max-delete should permit tracked renames
 (28)  : bisync track-renames max-delete-renames-aware
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File was deleted          - file1.txt
 INFO  : - Path1    File was deleted          - file2.txt
 INFO  : - Path1    File was deleted          - file3.txt
@@ -108,9 +64,7 @@ INFO  : - Path1    File is new               - r
 INFO  : - Path1    File is new               - renamed-file4.txt
 INFO  : - Path1    File is new               - renamed-file5.txt
 INFO  : Path1:   10 changes:    5 new,    0 modified,    5 deleted
-INFO  : Path2 checking for diffs
 INFO  : Path1: excluding 5 tracked renames from --max-delete
-INFO  : Applying changes
 INFO  : - Path2    Queue delete              - {path2/}file1.txt
 INFO  : - Path2    Queue delete              - {path2/}file2.txt
 INFO  : - Path2    Queue delete              - {path2/}file3.txt
@@ -121,7 +75,6 @@ INFO  : - Path1    Queue copy to Path2       - {
 INFO  : - Path1    Queue copy to Path2       - {path2/}renamed-file3.txt
 INFO  : - Path1    Queue copy to Path2       - {path2/}renamed-file4.txt
 INFO  : - Path1    Queue copy to Path2       - {path2/}renamed-file5.txt
-INFO  : - Path1    Do queued copies to                - Path2
 INFO  : {path2String}: Making map for --track-renames
 INFO  : {path2String}: Finished making map for --track-renames
 INFO  : renamed-file1.txt: Renamed from "file1.txt"
@@ -129,10 +82,6 @@ INFO  : renamed-file2.txt: Renamed from "file2.txt"
 INFO  : renamed-file3.txt: Renamed from "file3.txt"
 INFO  : renamed-file4.txt: Renamed from "file4.txt"
 INFO  : renamed-file5.txt: Renamed from "file5.txt"
-INFO  : There was nothing to transfer
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (29)  : test rename-aware max-delete should work from Path2
 (30)  : copy-as {path2/}renamed-file1.txt {path2/} renamed2-file1.txt
@@ -146,19 +95,6 @@ INFO  : Bisync successful
 (38)  : copy-as {path2/}renamed-file5.txt {path2/} renamed2-file5.txt
 (39)  : delete-file {path2/}renamed-file5.txt
 (40)  : bisync track-renames max-delete-renames-aware
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File was deleted          - renamed-file1.txt
 INFO  : - Path2    File was deleted          - renamed-file2.txt
 INFO  : - Path2    File was deleted          - renamed-file3.txt
@@ -171,7 +107,6 @@ INFO  : - Path2    File is new               - r
 INFO  : - Path2    File is new               - renamed2-file5.txt
 INFO  : Path2:   10 changes:    5 new,    0 modified,    5 deleted
 INFO  : Path2: excluding 5 tracked renames from --max-delete
-INFO  : Applying changes
 INFO  : - Path1    Queue delete              - {path1/}renamed-file1.txt
 INFO  : - Path1    Queue delete              - {path1/}renamed-file2.txt
 INFO  : - Path1    Queue delete              - {path1/}renamed-file3.txt
@@ -182,7 +117,6 @@ INFO  : - Path2    Queue copy to Path1       - {
 INFO  : - Path2    Queue copy to Path1       - {path1/}renamed2-file3.txt
 INFO  : - Path2    Queue copy to Path1       - {path1/}renamed2-file4.txt
 INFO  : - Path2    Queue copy to Path1       - {path1/}renamed2-file5.txt
-INFO  : - Path2    Do queued copies to                - Path1
 INFO  : {path1String}: Making map for --track-renames
 INFO  : {path1String}: Finished making map for --track-renames
 INFO  : renamed2-file1.txt: Renamed from "renamed-file1.txt"
@@ -190,10 +124,6 @@ INFO  : renamed2-file2.txt: Renamed from "renamed-file2.txt"
 INFO  : renamed2-file3.txt: Renamed from "renamed-file3.txt"
 INFO  : renamed2-file4.txt: Renamed from "renamed-file4.txt"
 INFO  : renamed2-file5.txt: Renamed from "renamed-file5.txt"
-INFO  : There was nothing to transfer
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (41)  : test unmatched deletes should still exceed max-delete
 (42)  : copy-as {path1/}renamed2-file1.txt {path1/} moved-file1.txt
@@ -205,18 +135,6 @@ INFO  : Bisync successful
 (48)  : delete-file {path1/}file6.txt
 (49)  : delete-file {path1/}file7.txt
 (50)  : bisync track-renames max-delete-renames-aware
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File was deleted          - file6.txt
 INFO  : - Path1    File was deleted          - file7.txt
 INFO  : - Path1    File was deleted          - renamed2-file1.txt
@@ -226,7 +144,6 @@ INFO  : - Path1    File was deleted          - r
 INFO  : - Path1    File was deleted          - renamed2-file5.txt
 INFO  : - Path1    File is new               - moved-file1.txt
 INFO  : Path1:    8 changes:    1 new,    0 modified,    7 deleted
-INFO  : Path2 checking for diffs
 INFO  : Path1: excluding 1 tracked renames from --max-delete
 ERROR : Safety abort: too many deletes (>50%, 6 of 9 after excluding 1 tracked renames) on Path1 "{path1/}". Run with --force if desired.
 NOTICE: Bisync aborted. Please try again.
@@ -235,18 +152,6 @@ Bisync error: too many deletes
 
 (52)  : test force bypasses max-delete and rename-aware hash preflight
 (53)  : bisync track-renames max-delete-renames-aware ignore-listing-checksum force
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File was deleted          - file6.txt
 INFO  : - Path1    File was deleted          - file7.txt
 INFO  : - Path1    File was deleted          - renamed2-file1.txt
@@ -256,8 +161,6 @@ INFO  : - Path1    File was deleted          - r
 INFO  : - Path1    File was deleted          - renamed2-file5.txt
 INFO  : - Path1    File is new               - moved-file1.txt
 INFO  : Path1:    8 changes:    1 new,    0 modified,    7 deleted
-INFO  : Path2 checking for diffs
-INFO  : Applying changes
 INFO  : - Path2    Queue delete              - {path2/}file6.txt
 INFO  : - Path2    Queue delete              - {path2/}file7.txt
 INFO  : - Path1    Queue copy to Path2       - {path2/}moved-file1.txt
@@ -266,11 +169,6 @@ INFO  : - Path2    Queue delete              - {
 INFO  : - Path2    Queue delete              - {path2/}renamed2-file3.txt
 INFO  : - Path2    Queue delete              - {path2/}renamed2-file4.txt
 INFO  : - Path2    Queue delete              - {path2/}renamed2-file5.txt
-INFO  : - Path1    Do queued copies to                - Path2
 INFO  : {path2String}: Making map for --track-renames
 INFO  : {path2String}: Finished making map for --track-renames
 INFO  : moved-file1.txt: Renamed from "renamed2-file1.txt"
-INFO  : There was nothing to transfer
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful

cmd/bisync/testdata/test_nomodtime/golden/test.log

@@ -3,24 +3,6 @@
 
 (02)  : test initial bisync
 (03)  : bisync resync nomodtime
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": false,
-"Size": true,
-"Checksum": true,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": true
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (04)  : test make modifications on both paths
 (05)  : test new on path2 - file10
@@ -59,18 +41,6 @@ INFO  : Bisync successful
 
 (29)  : test bisync run
 (30)  : bisync nomodtime
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": false,
-"Size": true,
-"Checksum": true,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": true
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File changed: size (larger), hash - file2.txt
 INFO  : - Path1    File was deleted          - file4.txt
 INFO  : - Path1    File changed: size (larger), hash - file5.txt
@@ -80,7 +50,6 @@ INFO  : - Path1    File was deleted          - f
 INFO  : - Path1    File is new               - file11.txt
 INFO  : Path1:    7 changes:    1 new,    3 modified,    3 deleted
 INFO  : (Modified:    3 larger,    0 smaller,    3 hash differs)
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File changed: size (larger), hash - file1.txt
 INFO  : - Path2    File was deleted          - file3.txt
 INFO  : - Path2    File changed: size (larger), hash - file5.txt
@@ -90,7 +59,6 @@ INFO  : - Path2    File was deleted          - f
 INFO  : - Path2    File is new               - file10.txt
 INFO  : Path2:    7 changes:    1 new,    3 modified,    3 deleted
 INFO  : (Modified:    3 larger,    0 smaller,    3 hash differs)
-INFO  : Applying changes
 INFO  : - Path1    Queue copy to Path2       - {path2/}file11.txt
 INFO  : - Path1    Queue copy to Path2       - {path2/}file2.txt
 INFO  : - Path2    Queue delete              - {path2/}file4.txt
@@ -104,8 +72,3 @@ INFO  : - Path1    Queue copy to Path2       - {
 INFO  : - Path2    Queue copy to Path1       - {path1/}file1.txt
 INFO  : - Path2    Queue copy to Path1       - {path1/}file10.txt
 INFO  : - Path1    Queue delete              - {path1/}file3.txt
-INFO  : - Path2    Do queued copies to                - Path1
-INFO  : - Path1    Do queued copies to                - Path2
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful

cmd/bisync/testdata/test_normalization/golden/test.log

@@ -4,23 +4,6 @@
 (02)  : touch-copy 2001-01-02 {datadir/}file1.txt {path2/}
 (03)  : test initial bisync
 (04)  : bisync resync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 
 (05)  : copy-as-NFC {datadir/}file1.txt {path1/}測試_Русский___ě_áñ👸🏼🧝🏾‍♀️💆🏿‍♂️🐨🤙🏼🤮🧑🏻‍🔧🧑‍🔬éö 測試_Русский___ě_áñ👸🏼🧝🏾‍♀️💆🏿‍♂️🐨🤙🏼🤮🧑🏻‍🔧🧑‍🔬éö.txt
@@ -34,47 +17,25 @@ INFO  : Bisync successful
 
 (11)  : test bisync run with fix-case
 (12)  : bisync fix-case
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File is new               - folder/HeLlO,wOrLd!.txt
 INFO  : - Path1    File is new               - folder/éééö.txt
 INFO  : - Path1    File is new               - "測試_Русский___ě_áñ👸🏼🧝🏾\u200d♀️💆🏿\u200d♂️🐨🤙🏼🤮🧑🏻\u200d🔧🧑\u200d🔬éö/測試_Русский___ě_áñ👸🏼🧝🏾\u200d♀️💆🏿\u200d♂️🐨🤙🏼🤮🧑🏻\u200d🔧🧑\u200d🔬éö.txt"
 INFO  : Path1:    3 changes:    3 new,    0 modified,    0 deleted
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File changed: size (larger), time (newer) - file1.txt
 INFO  : - Path2    File is new               - folder/éééö.txt
 INFO  : - Path2    File is new               - folder/hello,WORLD!.txt
 INFO  : Path2:    3 changes:    2 new,    1 modified,    0 deleted
 INFO  : (Modified:    1 newer,    0 older,    1 larger,    0 smaller)
-INFO  : Applying changes
-INFO  : Checking potential conflicts...
 NOTICE: {path2String}: 0 differences found
 NOTICE: {path2String}: 2 matching files
-INFO  : Finished checking the potential conflicts. %!s(<nil>)
 NOTICE: - WARNING  New or changed in both paths       - folder/HeLlO,wOrLd!.txt
 INFO  : folder/hello,WORLD!.txt: Files are equal but will copy anyway to fix case to folder/HeLlO,wOrLd!.txt
 NOTICE: - WARNING  New or changed in both paths       - folder/éééö.txt
 INFO  : folder/éééö.txt: Files are equal but will copy anyway to fix case to folder/éééö.txt
 INFO  : - Path1    Queue copy to Path2       - "{path2/}測試_Русский___ě_áñ👸🏼🧝🏾\u200d♀️💆🏿\u200d♂️🐨🤙🏼🤮🧑🏻\u200d🔧🧑\u200d🔬éö/測試_Русский___ě_áñ👸🏼🧝🏾\u200d♀️💆🏿\u200d♂️🐨🤙🏼🤮🧑🏻\u200d🔧🧑\u200d🔬éö.txt"
 INFO  : - Path2    Queue copy to Path1       - {path1/}file1.txt
-INFO  : - Path2    Do queued copies to                - Path1
-INFO  : - Path1    Do queued copies to                - Path2
 INFO  : folder/hello,WORLD!.txt: Fixed case by renaming to: folder/HeLlO,wOrLd!.txt
 INFO  : folder/éééö.txt: Fixed case by renaming to: folder/éééö.txt
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 
 (13)  : purge-children {path1/}
@@ -83,23 +44,6 @@ INFO  : Bisync successful
 (16)  : copy-as-NFC {datadir/}file1.txt {path2/} file2.txt
 (17)  : copy-as-NFC {datadir/}file1.txt {path1/} file3.txt
 (18)  : bisync resync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 
 (19)  : copy-as-NFC {datadir/}file1.txt {path1/}測試_Руский___ě_áñ👸🏼🧝🏾‍♀️💆🏿‍♂️🐨🤙🏼🤮🧑🏻‍🔧🧑‍🔬éö 測試_Руский___ě_áñ👸🏼🧝🏾‍♀️💆🏿‍♂️🐨🤙🏼🤮🧑🏻‍🔧🧑‍🔬éö.txt
@@ -113,34 +57,17 @@ INFO  : Bisync successful
 
 (25)  : test bisync run with normalization
 (26)  : bisync norm force
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File is new               - newfolder/HeLlO,wOrLd!.txt
 INFO  : - Path1    File is new               - newfolder/éééö.txt
 INFO  : - Path1    File is new               - "測試_Руский___ě_áñ👸🏼🧝🏾\u200d♀️💆🏿\u200d♂️🐨🤙🏼🤮🧑🏻\u200d🔧🧑\u200d🔬éö/測試_Руский___ě_áñ👸🏼🧝🏾\u200d♀️💆🏿\u200d♂️🐨🤙🏼🤮🧑🏻\u200d🔧🧑\u200d🔬éö.txt"
 INFO  : Path1:    3 changes:    3 new,    0 modified,    0 deleted
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File changed: time (newer) - file1.txt
 INFO  : - Path2    File is new               - newfolder/éééö.txt
 INFO  : - Path2    File is new               - newfolder/hello,WORLD!.txt
 INFO  : Path2:    3 changes:    2 new,    1 modified,    0 deleted
 INFO  : (Modified:    1 newer,    0 older)
-INFO  : Applying changes
-INFO  : Checking potential conflicts...
 NOTICE: {path2String}: 0 differences found
 NOTICE: {path2String}: 2 matching files
-INFO  : Finished checking the potential conflicts. %!s(<nil>)
 NOTICE: - WARNING  New or changed in both paths       - newfolder/HeLlO,wOrLd!.txt
 INFO  : newfolder/HeLlO,wOrLd!.txt: Files are equal but will copy anyway to update modtime (will not rename)
 INFO  : - Path2    Queue copy to Path1       - {path1/}newfolder/HeLlO,wOrLd!.txt
@@ -149,31 +76,9 @@ INFO  : newfolder/éééö.txt: Files are equal but will copy anyway to update m
 INFO  : - Path2    Queue copy to Path1       - {path1/}newfolder/éééö.txt
 INFO  : - Path1    Queue copy to Path2       - "{path2/}測試_Руский___ě_áñ👸🏼🧝🏾\u200d♀️💆🏿\u200d♂️🐨🤙🏼🤮🧑🏻\u200d🔧🧑\u200d🔬éö/測試_Руский___ě_áñ👸🏼🧝🏾\u200d♀️💆🏿\u200d♂️🐨🤙🏼🤮🧑🏻\u200d🔧🧑\u200d🔬éö.txt"
 INFO  : - Path2    Queue copy to Path1       - {path1/}file1.txt
-INFO  : - Path2    Do queued copies to                - Path1
-INFO  : - Path1    Do queued copies to                - Path2
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (27)  : test resync
 (28)  : bisync resync norm
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (29)  : test changed on one path
 (30)  : touch-copy 2001-01-05 {datadir/}file1.txt {path2/}
@@ -181,35 +86,15 @@ INFO  : Bisync successful
 (32)  : copy-as-NFC {datadir/}file1.txt {path1/}newfolder éééö.txt
 (33)  : copy-as-NFC {datadir/}file1.txt {path1/}newfolder HeLlO,wOrLd!.txt
 (34)  : bisync norm
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File changed: time (newer) - newfolder/HeLlO,wOrLd!.txt
 INFO  : - Path1    File changed: time (newer) - newfolder/éééö.txt
 INFO  : - Path1    File changed: time (newer) - "測試_Руский___ě_áñ👸🏼🧝🏾\u200d♀️💆🏿\u200d♂️🐨🤙🏼🤮🧑🏻\u200d🔧🧑\u200d🔬éö/測試_Руский___ě_áñ👸🏼🧝🏾\u200d♀️💆🏿\u200d♂️🐨🤙🏼🤮🧑🏻\u200d🔧🧑\u200d🔬éö.txt"
 INFO  : Path1:    3 changes:    0 new,    3 modified,    0 deleted
 INFO  : (Modified:    3 newer,    0 older)
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File changed: time (newer) - file1.txt
 INFO  : Path2:    1 changes:    0 new,    1 modified,    0 deleted
 INFO  : (Modified:    1 newer,    0 older)
-INFO  : Applying changes
 INFO  : - Path1    Queue copy to Path2       - {path2/}newfolder/hello,WORLD!.txt
 INFO  : - Path1    Queue copy to Path2       - {path2/}newfolder/éééö.txt
 INFO  : - Path1    Queue copy to Path2       - "{path2/}測試_Руский___ě_áñ👸🏼🧝🏾\u200d♀️💆🏿\u200d♂️🐨🤙🏼🤮🧑🏻\u200d🔧🧑\u200d🔬éö/測試_Руский___ě_áñ👸🏼🧝🏾\u200d♀️💆🏿\u200d♂️🐨🤙🏼🤮🧑🏻\u200d🔧🧑\u200d🔬éö.txt"
 INFO  : - Path2    Queue copy to Path1       - {path1/}file1.txt
-INFO  : - Path2    Do queued copies to                - Path1
-INFO  : - Path1    Do queued copies to                - Path2
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful

cmd/bisync/testdata/test_rclone_args/golden/test.log

@@ -5,24 +5,6 @@
 
 (03)  : test initial bisync
 (04)  : bisync resync checksum
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": false,
-"Size": true,
-"Checksum": true,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": true
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (05)  : test place newer files on both paths
 (06)  : copy-file {datadir/}file1.txt {path1/}
@@ -38,33 +20,14 @@ INFO  : Bisync successful
 
 (14)  : test run bisync with custom options
 (15)  : bisync checksum
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": false,
-"Size": true,
-"Checksum": true,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": true
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File changed: hash - file1.txt
 INFO  : Path1:    1 changes:    0 new,    1 modified,    0 deleted
 INFO  : (Modified:    1 hash differs)
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File changed: size (larger), hash - file2.txt
 INFO  : Path2:    1 changes:    0 new,    1 modified,    0 deleted
 INFO  : (Modified:    1 larger,    0 smaller,    1 hash differs)
-INFO  : Applying changes
 INFO  : - Path1    Queue copy to Path2       - {path2/}file1.txt
 INFO  : - Path2    Queue copy to Path1       - {path1/}file2.txt
-INFO  : - Path2    Do queued copies to                - Path1
-INFO  : - Path1    Do queued copies to                - Path2
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (16)  : touch-glob 2007-07-23 {datadir/} *
 
@@ -80,49 +43,11 @@ INFO  : Bisync successful
 (24)  : touch-glob 2007-07-23 {path2/}subdir/ file21.txt
 
 (25)  : bisync size-only
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": false,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File changed: size (smaller) - file1.txt
 INFO  : Path2:    1 changes:    0 new,    1 modified,    0 deleted
 INFO  : (Modified:    0 larger,    1 smaller)
-INFO  : Applying changes
 INFO  : - Path2    Queue copy to Path1       - {path1/}file1.txt
-INFO  : - Path2    Do queued copies to                - Path1
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 (26)  : bisync resync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (27)  : copy-file {datadir/}file1.txt {path1/}
 (28)  : copy-file {datadir/}file2.txt {path2/}
@@ -136,51 +61,14 @@ INFO  : Bisync successful
 (34)  : touch-glob 2007-07-23 {path2/}subdir/ file21.txt
 
 (35)  : bisync ignore-size
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": false,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File changed: time (newer) - file2.txt
 INFO  : - Path2    File changed: time (newer) - subdir/file21.txt
 INFO  : Path2:    2 changes:    0 new,    2 modified,    0 deleted
 INFO  : (Modified:    2 newer,    0 older)
-INFO  : Applying changes
 INFO  : - Path2    Queue copy to Path1       - {path1/}file2.txt
 INFO  : - Path2    Queue copy to Path1       - {path1/}subdir/file21.txt
-INFO  : - Path2    Do queued copies to                - Path1
-INFO  : There was nothing to transfer
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (36)  : bisync resync compare-all
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": true,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": true
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (37)  : copy-as {datadir/}file21.txt {path2/} file2.txt
 
@@ -198,34 +86,15 @@ INFO  : Bisync successful
 (45)  : touch-glob 2023-08-26 {path2/}subdir/ file21.txt
 
 (46)  : bisync compare-all
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": true,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": true
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File changed: time (newer) - file1.txt
 INFO  : - Path1    File changed: time (newer) - subdir/file20.txt
 INFO  : Path1:    2 changes:    0 new,    2 modified,    0 deleted
 INFO  : (Modified:    2 newer,    0 older)
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File changed: size (smaller), hash - file2.txt
 INFO  : - Path2    File changed: time (newer) - subdir/file21.txt
 INFO  : Path2:    2 changes:    0 new,    2 modified,    0 deleted
 INFO  : (Modified:    1 newer,    0 older,    0 larger,    1 smaller,    1 hash differs)
-INFO  : Applying changes
 INFO  : - Path1    Queue copy to Path2       - {path2/}file1.txt
 INFO  : - Path1    Queue copy to Path2       - {path2/}subdir/file20.txt
 INFO  : - Path2    Queue copy to Path1       - {path1/}file2.txt
 INFO  : - Path2    Queue copy to Path1       - {path1/}subdir/file21.txt
-INFO  : - Path2    Do queued copies to                - Path1
-INFO  : - Path1    Do queued copies to                - Path2
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful

cmd/bisync/testdata/test_resolve/golden/test.log

@@ -3,25 +3,6 @@
 
 (02)  : test initial bisync
 (03)  : bisync resync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (04)  : test changed on both paths and NOT identical - file1 (file1R, file1L)
 (05)  : touch-glob 2001-01-02 {datadir/} file1R.txt
@@ -32,41 +13,20 @@ INFO  : Bisync successful
 (09)  : test bisync run with --conflict-resolve=newer --conflict-loser=delete --conflict-suffix=potato
 
 (10)  : bisync conflict-resolve=newer conflict-loser=delete conflict-suffix=potato
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File changed: size (larger), time (newer) - file1.txt
 INFO  : Path1:    1 changes:    0 new,    1 modified,    0 deleted
 INFO  : (Modified:    1 newer,    0 older,    1 larger,    0 smaller)
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File changed: size (larger), time (newer) - file1.txt
 INFO  : Path2:    1 changes:    0 new,    1 modified,    0 deleted
 INFO  : (Modified:    1 newer,    0 older,    1 larger,    0 smaller)
-INFO  : Applying changes
-INFO  : Checking potential conflicts...
 ERROR : file1.txt: {hashtype} differ
 NOTICE: {path2String}: 1 differences found
 NOTICE: {path2String}: 1 errors while checking
-INFO  : Finished checking the potential conflicts. 1 differences found
 NOTICE: - WARNING  New or changed in both paths       - file1.txt
 INFO  : file1.txt: Path1 is newer. Path1: 2001-03-04 00:00:00 +0000 UTC, Path2: 2001-01-02 00:00:00 +0000 UTC, Difference: 1464h0m0s
 INFO  : file1.txt: The winner is: Path1
 NOTICE: - Path2    Deleting Path2 copy                - {path2/}file1.txt
 INFO  : - Path1    Queue copy to Path2       - file1.txt
-INFO  : - Path1    Do queued copies to                - Path2
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (11)  : test changed on both paths and NOT identical - file1 (file1R, file1L)
 (12)  : touch-glob 2001-07-23 {datadir/} file1R.txt
@@ -77,43 +37,21 @@ INFO  : Bisync successful
 (16)  : test bisync run with --conflict-resolve=path2 --conflict-loser=num --conflict-suffix=dinosaur
 
 (17)  : bisync conflict-resolve=path2 conflict-loser=num conflict-suffix=dinosaur
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File changed: time (newer) - file1.txt
 INFO  : Path1:    1 changes:    0 new,    1 modified,    0 deleted
 INFO  : (Modified:    1 newer,    0 older)
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File changed: time (newer) - file1.txt
 INFO  : Path2:    1 changes:    0 new,    1 modified,    0 deleted
 INFO  : (Modified:    1 newer,    0 older)
-INFO  : Applying changes
-INFO  : Checking potential conflicts...
 ERROR : file1.txt: {hashtype} differ
 NOTICE: {path2String}: 1 differences found
 NOTICE: {path2String}: 1 errors while checking
-INFO  : Finished checking the potential conflicts. 1 differences found
 NOTICE: - WARNING  New or changed in both paths       - file1.txt
 INFO  : file1.txt: The winner is: Path2
 NOTICE: - Path1    Renaming Path1 copy                - {path1/}file1.txt.dinosaur1
 NOTICE: - Path1    Queue copy to Path2       - {path2/}file1.txt.dinosaur1
 NOTICE: - Path2    Not renaming Path2 copy, as it was determined the winner - {path2/}file1.txt
 NOTICE: - Path2    Queue copy to Path1       - {path1/}file1.txt
-INFO  : - Path2    Do queued copies to                - Path1
-INFO  : - Path1    Do queued copies to                - Path2
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (18)  : test changed on both paths and NOT identical - file1 (file1R, file1L)
 (19)  : touch-glob 2002-07-23 {datadir/} file1R.txt
@@ -124,30 +62,13 @@ INFO  : Bisync successful
 (23)  : test bisync run with --conflict-resolve=larger --conflict-loser=num --conflict-suffix=apple
 
 (24)  : bisync conflict-resolve=larger conflict-loser=num conflict-suffix=apple
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File is new               - file1.txt
 INFO  : Path1:    1 changes:    1 new,    0 modified,    0 deleted
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File is new               - file1.txt
 INFO  : Path2:    1 changes:    1 new,    0 modified,    0 deleted
-INFO  : Applying changes
-INFO  : Checking potential conflicts...
 ERROR : file1.txt: {hashtype} differ
 NOTICE: {path2String}: 1 differences found
 NOTICE: {path2String}: 1 errors while checking
-INFO  : Finished checking the potential conflicts. 1 differences found
 NOTICE: - WARNING  New or changed in both paths       - file1.txt
 INFO  : file1.txt: Winner cannot be determined as sizes are equal. Path1: 33, Path2: 33, Difference: 0
 INFO  : file1.txt: A winner could not be determined.
@@ -155,11 +76,6 @@ NOTICE: - Path1    Renaming Path1 copy                - {
 NOTICE: - Path1    Queue copy to Path2       - {path2/}file1.txt.apple1
 NOTICE: - Path2    Renaming Path2 copy                - {path2/}file1.txt.apple2
 NOTICE: - Path2    Queue copy to Path1       - {path1/}file1.txt.apple2
-INFO  : - Path2    Do queued copies to                - Path1
-INFO  : - Path1    Do queued copies to                - Path2
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (25)  : test different suffixes
 (26)  : touch-glob 2003-07-23 {datadir/} file1R.txt
@@ -170,30 +86,13 @@ INFO  : Bisync successful
 (30)  : test bisync run with --conflict-resolve=older --conflict-loser=num --conflict-suffix=cloud,local
 
 (31)  : bisync conflict-resolve=older conflict-loser=num conflict-suffix=cloud,local
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File is new               - file1.txt
 INFO  : Path1:    1 changes:    1 new,    0 modified,    0 deleted
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File is new               - file1.txt
 INFO  : Path2:    1 changes:    1 new,    0 modified,    0 deleted
-INFO  : Applying changes
-INFO  : Checking potential conflicts...
 ERROR : file1.txt: {hashtype} differ
 NOTICE: {path2String}: 1 differences found
 NOTICE: {path2String}: 1 errors while checking
-INFO  : Finished checking the potential conflicts. 1 differences found
 NOTICE: - WARNING  New or changed in both paths       - file1.txt
 INFO  : file1.txt: Winner cannot be determined as times are equal. Path1: 2003-07-23 00:00:00 +0000 UTC, Path2: 2003-07-23 00:00:00 +0000 UTC, Difference: 0s
 INFO  : file1.txt: A winner could not be determined.
@@ -201,11 +100,6 @@ NOTICE: - Path1    Renaming Path1 copy                - {
 NOTICE: - Path1    Queue copy to Path2       - {path2/}file1.txt.cloud1
 NOTICE: - Path2    Renaming Path2 copy                - {path2/}file1.txt.local1
 NOTICE: - Path2    Queue copy to Path1       - {path1/}file1.txt.local1
-INFO  : - Path2    Do queued copies to                - Path1
-INFO  : - Path1    Do queued copies to                - Path2
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (32)  : test legacy
 (33)  : touch-glob 2004-07-23 {datadir/} file1R.txt
@@ -216,40 +110,18 @@ INFO  : Bisync successful
 (37)  : test bisync run with --conflict-resolve=none --conflict-loser=pathname --conflict-suffix=.path
 
 (38)  : bisync conflict-resolve=none conflict-loser=pathname conflict-suffix=.path
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File is new               - file1.txt
 INFO  : Path1:    1 changes:    1 new,    0 modified,    0 deleted
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File is new               - file1.txt
 INFO  : Path2:    1 changes:    1 new,    0 modified,    0 deleted
-INFO  : Applying changes
-INFO  : Checking potential conflicts...
 ERROR : file1.txt: {hashtype} differ
 NOTICE: {path2String}: 1 differences found
 NOTICE: {path2String}: 1 errors while checking
-INFO  : Finished checking the potential conflicts. 1 differences found
 NOTICE: - WARNING  New or changed in both paths       - file1.txt
 NOTICE: - Path1    Renaming Path1 copy                - {path1/}file1.txt..path1
 NOTICE: - Path1    Queue copy to Path2       - {path2/}file1.txt..path1
 NOTICE: - Path2    Renaming Path2 copy                - {path2/}file1.txt..path2
 NOTICE: - Path2    Queue copy to Path1       - {path1/}file1.txt..path2
-INFO  : - Path2    Do queued copies to                - Path1
-INFO  : - Path1    Do queued copies to                - Path2
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (39)  : test deletes on both sides with default suffix
 (40)  : touch-glob 2005-01-02 {datadir/} file1R.txt
@@ -261,35 +133,18 @@ INFO  : Bisync successful
 
 (46)  : test bisync run with --conflict-resolve=newer --conflict-loser=delete
 (47)  : bisync conflict-resolve=newer conflict-loser=delete
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File changed: size (larger), time (newer) - file2.txt
 INFO  : - Path1    File is new               - file1.txt
 INFO  : Path1:    2 changes:    1 new,    1 modified,    0 deleted
 INFO  : (Modified:    1 newer,    0 older,    1 larger,    0 smaller)
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File changed: size (larger), time (newer) - file2.txt
 INFO  : - Path2    File is new               - file1.txt
 INFO  : Path2:    2 changes:    1 new,    1 modified,    0 deleted
 INFO  : (Modified:    1 newer,    0 older,    1 larger,    0 smaller)
-INFO  : Applying changes
-INFO  : Checking potential conflicts...
 ERROR : file1.txt: {hashtype} differ
 ERROR : file2.txt: {hashtype} differ
 NOTICE: {path2String}: 2 differences found
 NOTICE: {path2String}: 2 errors while checking
-INFO  : Finished checking the potential conflicts. 2 differences found
 NOTICE: - WARNING  New or changed in both paths       - file1.txt
 INFO  : file1.txt: Path1 is newer. Path1: 2006-03-04 00:00:00 +0000 UTC, Path2: 2005-01-02 00:00:00 +0000 UTC, Difference: 10224h0m0s
 INFO  : file1.txt: The winner is: Path1
@@ -300,11 +155,6 @@ INFO  : file2.txt: Path2 is newer. Path1: 2005-01-02 00:00:00 +0000 UTC, Path2:
 INFO  : file2.txt: The winner is: Path2
 NOTICE: - Path1    Deleting Path1 copy                - {path1/}file2.txt
 INFO  : - Path2    Queue copy to Path1       - file2.txt
-INFO  : - Path2    Do queued copies to                - Path1
-INFO  : - Path1    Do queued copies to                - Path2
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (48)  : test --conflict-resolve newer --conflict-loser pathname --conflict-suffix path
 (49)  : touch-glob 2004-07-23 {datadir/} file1R.txt
@@ -315,35 +165,18 @@ INFO  : Bisync successful
 (53)  : test bisync run with --conflict-resolve=newer --conflict-loser=pathname --conflict-suffix=path
 
 (54)  : bisync conflict-resolve=newer conflict-loser=pathname conflict-suffix=path
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File changed: time (older) - file1.txt
 INFO  : - Path1    File is new               - file2.txt
 INFO  : Path1:    2 changes:    1 new,    1 modified,    0 deleted
 INFO  : (Modified:    0 newer,    1 older)
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File changed: time (older) - file1.txt
 INFO  : - Path2    File is new               - file2.txt
 INFO  : Path2:    2 changes:    1 new,    1 modified,    0 deleted
 INFO  : (Modified:    0 newer,    1 older)
-INFO  : Applying changes
-INFO  : Checking potential conflicts...
 ERROR : file1.txt: {hashtype} differ
 NOTICE: {path2String}: 1 differences found
 NOTICE: {path2String}: 1 errors while checking
 NOTICE: {path2String}: 1 matching files
-INFO  : Finished checking the potential conflicts. 1 differences found
 NOTICE: - WARNING  New or changed in both paths       - file1.txt
 INFO  : file1.txt: Path1 is newer. Path1: 2004-07-25 00:00:00 +0000 UTC, Path2: 2004-07-23 00:00:00 +0000 UTC, Difference: 48h0m0s
 INFO  : file1.txt: The winner is: Path1
@@ -353,8 +186,3 @@ NOTICE: - Path2    Renaming Path2 copy                - {
 NOTICE: - Path2    Queue copy to Path1       - {path1/}file1.txt.path2
 NOTICE: - WARNING  New or changed in both paths       - file2.txt
 INFO  : Files are equal! Skipping: file2.txt
-INFO  : - Path2    Do queued copies to                - Path1
-INFO  : - Path1    Do queued copies to                - Path2
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful

cmd/bisync/testdata/test_resync_modes/golden/test.log

@@ -9,24 +9,6 @@
 
 (07)  : test bisync run with --resync-mode=newer
 (08)  : bisync resync resync-mode=newer
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (09)  : test changed on both paths and NOT identical - file1 (file1R, file1L)
 (10)  : touch-glob 2001-07-23 {datadir/} file1R.txt
@@ -36,23 +18,6 @@ INFO  : Bisync successful
 
 (14)  : test bisync run with --resync-mode=path2
 (15)  : bisync resync resync-mode=path2
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (16)  : test changed on both paths and NOT identical - file1 (file1R, file1L)
 (17)  : touch-glob 2002-07-23 {datadir/} file1R.txt
@@ -62,24 +27,7 @@ INFO  : Bisync successful
 
 (21)  : test bisync run with --resync-mode=larger
 (22)  : bisync resync resync-mode=larger
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
 INFO  : file1.txt: Path2 is larger. Path1: 33, Path2: 42, Difference: 9
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (23)  : test changed on both paths and NOT identical - file1 (file1R, file1L)
 (24)  : touch-glob 2003-07-23 {datadir/} file1R.txt
@@ -89,24 +37,7 @@ INFO  : Bisync successful
 
 (28)  : test bisync run with --resync-mode=older
 (29)  : bisync resync resync-mode=older
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
 INFO  : file1.txt: Path2 is older. Path1: 2003-09-04 00:00:00 +0000 UTC, Path2: 2003-07-23 00:00:00 +0000 UTC, Difference: 1032h0m0s
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (30)  : test changed on both paths and NOT identical - file1 (file1R, file1L)
 (31)  : touch-glob 2004-07-23 {datadir/} file1R.txt
@@ -116,26 +47,8 @@ INFO  : Bisync successful
 
 (35)  : test bisync run with --resync-mode=smaller
 (36)  : bisync resync resync-mode=smaller
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
 INFO  : file1.txt: Path1 is smaller. Path1: 33, Path2: 42, Difference: 9
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
 INFO  : file1.txt: Path1 is smaller. Path1: 33, Path2: 42, Difference: 9
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (37)  : test changed on both paths and NOT identical - file1 (file1R, file1L)
 (38)  : touch-glob 2005-01-02 {datadir/} file1R.txt
@@ -147,24 +60,6 @@ INFO  : Bisync successful
 
 (44)  : test bisync run with --resync-mode=path1
 (45)  : bisync resync resync-mode=path1
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (46)  : test no winner
 (47)  : touch-glob 2022-02-22 {datadir/} file1R.txt
@@ -176,20 +71,3 @@ INFO  : Bisync successful
 
 (53)  : test bisync run with --resync-mode=newer
 (54)  : bisync resync resync-mode=newer
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful

cmd/bisync/testdata/test_rmdirs/golden/test.log

@@ -3,54 +3,15 @@
 
 (02)  : test initial bisync
 (03)  : bisync resync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (04)  : test 1. delete path1 subdir file
 (05)  : delete-file {path1/}subdir/file20.txt
 
 (06)  : test 2. run bisync without remove-empty-dirs
 (07)  : bisync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File was deleted          - subdir/file20.txt
 INFO  : Path1:    1 changes:    0 new,    0 modified,    1 deleted
-INFO  : Path2 checking for diffs
-INFO  : Applying changes
 INFO  : - Path2    Queue delete              - {path2/}subdir/file20.txt
-INFO  : - Path1    Do queued copies to                - Path2
-INFO  : There was nothing to transfer
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (08)  : test 3. confirm the subdir still exists on both paths
 (09)  : list-dirs {path1/}
@@ -60,27 +21,8 @@ subdir/ - filename hash: 86ae37b338459868804e9697025ba4c2
 
 (11)  : test 4. run bisync with remove-empty-dirs
 (12)  : bisync remove-empty-dirs
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
-INFO  : Path2 checking for diffs
-INFO  : No changes found
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Removing empty directories
 INFO  : subdir: Removing directory
 INFO  : subdir: Removing directory
-INFO  : Bisync successful
 
 (13)  : test 5. confirm the subdir has been removed on both paths
 (14)  : list-dirs {path1/}

cmd/bisync/testdata/test_volatile/golden/test.log

@@ -2,25 +2,6 @@
 
 (02)  : test initial bisync
 (03)  : bisync resync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Copying Path2 files to Path1
-INFO  : - Path2    Resync is copying files to         - Path1
-INFO  : There was nothing to transfer
-INFO  : - Path1    Resync is copying files to         - Path2
-INFO  : There was nothing to transfer
-INFO  : Resync updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (04)  : test changed on both paths - file5 (file5R, file5L)
 (05)  : touch-glob 2001-01-02 {datadir/} file5R.txt
@@ -32,42 +13,20 @@ INFO  : Bisync successful
 (10)  : test bisync with 50 files created during - should ignore new files
 (11)  : test-func
 (12)  : bisync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File changed: size (larger), time (newer) - file5.txt
 INFO  : Path1:    1 changes:    0 new,    1 modified,    0 deleted
 INFO  : (Modified:    1 newer,    0 older,    1 larger,    0 smaller)
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File changed: size (larger), time (newer) - file5.txt
 INFO  : Path2:    1 changes:    0 new,    1 modified,    0 deleted
 INFO  : (Modified:    1 newer,    0 older,    1 larger,    0 smaller)
-INFO  : Applying changes
-INFO  : Checking potential conflicts...
 ERROR : file5.txt: {hashtype} differ
 NOTICE: {path2String}: 1 differences found
 NOTICE: {path2String}: 1 errors while checking
-INFO  : Finished checking the potential conflicts. 1 differences found
 NOTICE: - WARNING  New or changed in both paths       - file5.txt
 NOTICE: - Path1    Renaming Path1 copy                - {path1/}file5.txt.conflict1
 NOTICE: - Path1    Queue copy to Path2       - {path2/}file5.txt.conflict1
 NOTICE: - Path2    Renaming Path2 copy                - {path2/}file5.txt.conflict2
 NOTICE: - Path2    Queue copy to Path1       - {path1/}file5.txt.conflict2
-INFO  : - Path2    Do queued copies to                - Path1
-INFO  : - Path1    Do queued copies to                - Path2
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (13)  : test changed on both paths - file5 (file5R, file5L)
 (14)  : touch-glob 2001-01-02 {datadir/} file5R.txt
@@ -78,19 +37,6 @@ INFO  : Bisync successful
 (18)  : test next bisync - should now notice new files
 (19)  : test-func
 (20)  : bisync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File is new               - file100.txt
 INFO  : - Path1    File is new               - file5.txt
 INFO  : - Path1    File is new               - file51.txt
@@ -143,7 +89,6 @@ INFO  : - Path1    File is new               - f
 INFO  : - Path1    File is new               - file98.txt
 INFO  : - Path1    File is new               - file99.txt
 INFO  : Path1:   51 changes:   51 new,    0 modified,    0 deleted
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File changed: size (larger), time (newer) - file1.txt
 INFO  : - Path2    File changed: size (larger), time (newer) - file2.txt
 INFO  : - Path2    File changed: size (larger), time (newer) - file3.txt
@@ -196,12 +141,9 @@ INFO  : - Path2    File is new               - f
 INFO  : - Path2    File is new               - file9.txt
 INFO  : Path2:   50 changes:   43 new,    7 modified,    0 deleted
 INFO  : (Modified:    7 newer,    0 older,    7 larger,    0 smaller)
-INFO  : Applying changes
-INFO  : Checking potential conflicts...
 ERROR : file5.txt: {hashtype} differ
 NOTICE: {path2String}: 1 differences found
 NOTICE: {path2String}: 1 errors while checking
-INFO  : Finished checking the potential conflicts. 1 differences found
 INFO  : - Path1    Queue copy to Path2       - {path2/}file100.txt
 NOTICE: - WARNING  New or changed in both paths       - file5.txt
 NOTICE: - Path1    Renaming Path1 copy                - {path1/}file5.txt.conflict3
@@ -306,11 +248,6 @@ INFO  : - Path2    Queue copy to Path1       - {
 INFO  : - Path2    Queue copy to Path1       - {path1/}file7.txt
 INFO  : - Path2    Queue copy to Path1       - {path1/}file8.txt
 INFO  : - Path2    Queue copy to Path1       - {path1/}file9.txt
-INFO  : - Path2    Do queued copies to                - Path1
-INFO  : - Path1    Do queued copies to                - Path2
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful
 
 (21)  : test changed on both paths - file5 (file5R, file5L)
 (22)  : touch-glob 2001-01-02 {datadir/} file5R.txt
@@ -321,37 +258,15 @@ INFO  : Bisync successful
 (26)  : test next bisync - should be no changes except dummy
 (27)  : test-func
 (28)  : bisync
-INFO  : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
-INFO  : Bisyncing with Comparison Settings:
-{
-"Modtime": true,
-"Size": true,
-"Checksum": false,
-"NoSlowHash": false,
-"SlowHashSyncOnly": false,
-"DownloadHash": false
-}
-INFO  : Synching Path1 "{path1/}" with Path2 "{path2/}"
-INFO  : Building Path1 and Path2 listings
-INFO  : Path1 checking for diffs
 INFO  : - Path1    File is new               - file5.txt
 INFO  : Path1:    1 changes:    1 new,    0 modified,    0 deleted
-INFO  : Path2 checking for diffs
 INFO  : - Path2    File is new               - file5.txt
 INFO  : Path2:    1 changes:    1 new,    0 modified,    0 deleted
-INFO  : Applying changes
-INFO  : Checking potential conflicts...
 ERROR : file5.txt: {hashtype} differ
 NOTICE: {path2String}: 1 differences found
 NOTICE: {path2String}: 1 errors while checking
-INFO  : Finished checking the potential conflicts. 1 differences found
 NOTICE: - WARNING  New or changed in both paths       - file5.txt
 NOTICE: - Path1    Renaming Path1 copy                - {path1/}file5.txt.conflict5
 NOTICE: - Path1    Queue copy to Path2       - {path2/}file5.txt.conflict5
 NOTICE: - Path2    Renaming Path2 copy                - {path2/}file5.txt.conflict6
 NOTICE: - Path2    Queue copy to Path1       - {path1/}file5.txt.conflict6
-INFO  : - Path2    Do queued copies to                - Path1
-INFO  : - Path1    Do queued copies to                - Path2
-INFO  : Updating listings
-INFO  : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
-INFO  : Bisync successful